Specialty Coatings

Foils & Films

Performance in all regards for artificial leather

Are you active in artificial leather manufacturing? Our waterborne UV (UCECOAT ®) and 100% UV (EBECRYL®) technologies can help you achieve improved productivity, enhanced performance properties and a greener footprint. Both technologies are solvent-free, and demonstrate excellent performances in bally flex, martindale abrasion and denim test. The Excimer process can also be applied with 100% UV solutions to achieve super matte surface effects.

  • Eco-friendly
  • High flexibility
  • Excellent stain resistance
  • Excellent abrasion resistance
Performance in all regards for artificial leather

Flexibility and elongation are the key for formable film coating

With more and more substrate coatings moving to plastics film coating technology for flat and curved shapes of parts, allnex continues to develop various resin solutions to meet with the evolving film coating market. Our innovative dual cure resin system EBECRYL® 4900 and EBECRYL® 4950 is an excellent option for 3D thermoforming parts. It is tack-free after solvent evaporation and allows 300% elongation before UV cure without compromising the film performance.
 
Are you in the transition to film coating application? Our expertise can help you to create the optimal solution.

  • High elongation
  • Excellent abrasion resistance
  • Dual cure
Flexibility and elongation are the key for formable film coating

Waterborne adhesive for foils & films

With more and more industries turning to plastic film coatings, adhesion to different plastic substrates is very important. Our DAOTAN® products (highlighted below in this page) are low VOC water-borne systems with a great balance between block and heat resistance and have excellent adhesion to plastic substrates. They can be used in applications such as profile wrapping and shrink wrapping to give barrier properties and initial tack

  • Adhesion to various plastic substrates
  • High durabiliity & elongation
  • High clarity and transparency
Waterborne adhesive for foils & films

Melamines resin for high performance foils and films

Melamine resins are used in acrylic and other liquid coatings systems to provide protective layers on paper, board stock, filtration media and other laminate types using a variety of applications techniques in order to economically provide high performing surface protection and appearance properties. CYMEL© 385 is one such resin used for these applications - it is fully soluble in water and provides fast cure properties resulting in high film hardness and low formaldehyde release during cure.

  • Economical film systems cost
  • Water soluble
  • Enable fast cure
Melamines resin for high performance foils and films

Decorative paper and foils: design meets the highest performance available

Where countless options for haptic and aesthetics join the highest surface performance specification, our UV/EB-cure EBECRYL® range brings resistance to the decorative surface with the maximum process efficiency and absolute design freedom.

  • High Surface Hardness and scratch resistance
  • Haptics and aesthetics
  • UV/EB cure for maximum productivity
Decorative paper and foils: design meets the highest performance available

Looking for a particular product?